Transmitter Parts
Keep your transmitter performing at peak efficiency with genuine replacement components.
Know which transmitter you have? Click the model number to be taken directly to compatible parts.
Replacement Antennas
Standard replacement antennas at 13 inches long correspond with the LF-2G Series Transmitters as well as the XLF-Series Transmitters.
Our replacement Loaded Antennas correspond with our Razors, LF-4's and XLF Transmitters. They are 6.5 inches long with bases that consist of special tuning components, allowing for more range while sacrificing length.
Be sure to select the antenna for the transmitter model and frequency you have below.
Replacement antenna with a thicker structure designed specifically for hacking.
Replacement leg mount leather bewits or tail mounting wire clips and tube assemblies.
Mounting Hardware
Brass tube designed for clamping to the deck feather in which the Wire Clip Tail Mount can attach to.
LF Series Parts
LF-1 Parts
The LF-1 requires:
A holder to help ensure the battery stays in place.
One 392 silver oxide battery (high drain).
Battery Holders are used to secure the battery in place during use. These holders are for the LF-1 transmitter that uses one 392 Battery.
Pack of 10
392 Silver Oxide Batteries
Models Include:
LF-1 non special - One battery to operate
LF-2 & LF3 non special - Two batteries to operate
XLF 3v - Two batteries to operate
XLF 6v - Four batteries to operate
LF-2 / LF-3 Parts
LF-2 / LF-3 requires
A holder to help ensure the battery stays in place.
A sleeve to stack two 392 batteries for 3v operation.
The LF-2 / LF-3 runs on two 392 silver oxide batteries (high drain).
Battery Holders are used to secure the battery in place during use. These holders are for transmitters models that use two stacked 392 batteries (for 3 Volts) or three stacked 396 batteries (for 4.5 Volts).
Models include, LF-2 & LF-3 (non special) and Beeper/Flasher Bells
Pack of 10
Battery sleeves are meant to hold two 392 batteries in a stack for 3v.
Models include: LF-2 & LF-3 (non special) and XLF 3v transmitters
Pack of 10
392 Silver Oxide Batteries
Models Include:
LF-1 non special - One battery to operate
LF-2 & LF3 non special - Two batteries to operate
XLF 3v - Two batteries to operate
XLF 6v - Four batteries to operate
LF-4 Parts
The LF-4 requires:
A holder to help ensure the battery stays in place.
One 1/3N lithium battery.
Battery Holders are used to secure the battery in place during use. These holders are for transmitters models that use 1/3N batteries, Such as our 1/3N Hack transmitters and the LF-4.
Pack of 10
1/3N Lithium Batteries
LF-2 & LF-3 Hack - One battery to operate
LF-4 - One battery to operate
Our personalized key chain magnet comes complimentary with all of our products featuring a magnetic tap on/tap off function. However, they are available for purchase separately.
XLF Series Parts
XLF 3 volt Parts
XLF 3v requires:
A sleeve to stack two 392 batteries for 3v operation.
Two 392 silver oxide batteries (high drain) to run at 3v.
Battery sleeves are meant to hold two 392 batteries in a stack for 3v.
Models include: LF-2 & LF-3 (non special) and XLF 3v transmitters
Pack of 10
392 Silver Oxide Batteries
Models Include:
LF-1 non special - One battery to operate
LF-2 & LF3 non special - Two batteries to operate
XLF 3v - Two batteries to operate
XLF 6v - Four batteries to operate
XLF 4.5v requires
A sleeve to stack three 396 batteries for 4.5v operation.
Three 396 silver oxide batteries (high drain) to run at 4.5v.
XLF 4.5 volt Parts
Battery sleeves are meant to hold two 392 batteries in a stack for 3v.
Models include: LF-2 & LF-3 (non special) and XLF 3v transmitters
Pack of 10
396 Silver Oxide Batteries
XLF 4.5v - Three batteries to operate
Beeper & Flasher Bells - Three batteries to operate
XLF 6 volt Parts
XLF 6v requires
A sleeve to stack four 392 batteries for 6v operation.
Four 392 silver oxide batteries (high drain) to run at 6v.
Battery sleeves are meant to hold four 392 batteries in a stack for 6v.
Models include: XLF 6v transmitters
Pack of 10
392 Silver Oxide Batteries
Models Include:
LF-1 non special - One battery to operate
LF-2 & LF3 non special - Two batteries to operate
XLF 3v - Two batteries to operate
XLF 6v - Four batteries to operate
Parts for ALL XLFs
LF Special Series Parts
LF-1 Special Parts
The LF-1 Special requires:
A holder to help ensure the battery stays in place.
One 361 silver oxide battery (high drain).
Battery Holders are used to secure the battery in place during use. These holders are for the LF-1 Special transmitter model that uses one 361 battery.
Pack of 10
361 Silver Oxide Batteries
LF-1 Special - One battery to operate
LF-2 & LF-3 Specials - Two Batteries to operate
LF-2 / LF-3 Special Parts
LF-2 / LF-3 Special requires
A holder to help ensure the battery stays in place.
A sleeve to stack two 361 batteries for 3v operation.
The LF-2 / LF-3 runs on two 361 silver oxide batteries (high drain).
Battery Holders are used to secure the battery in place during use. These holders are for transmitters models that use two stacked 361 Batteries.
Models Include: LF-2 Special and LF-3 Special
Pack of 10
A sleeve used to stack two 361 solver oxide batteries into one small 3v battery package for LF-2 and LF-3 Specials.
Comes in a pack of 10
361 Silver Oxide Batteries
LF-1 Special - One battery to operate
LF-2 & LF-3 Specials - Two Batteries to operate
LF Hack Parts
The LF Hack requires:
A holder to help ensure the battery stays in place.
One 1/3N lithium battery.
Battery Holders are used to secure the battery in place during use. These holders are for transmitters models that use 1/3N batteries, Such as our 1/3N Hack transmitters and the LF-4.
Pack of 10
1/3N Lithium Batteries
LF-2 & LF-3 Hack - One battery to operate
LF-4 - One battery to operate
Replacement antenna with a thicker structure designed specifically for hacking.