L.L. Electronics

Check us out on
Google +

Contact us
Documents
General Information about our company background
Falconry Transmitters from Luksander
Receivers - If there is something out there you'll find it
Dog Collars From LL Electronics
Receivers from FL Electronics
Biology and Other Research Transmitters From LL Electronics
Radio Telemetry for Planes Rockets and other uses
Custom transmitters for a wide range of user applications
Receivers by F&L Electronics

 

Our MN and MNS series receivers are the original light weight, super sensitive and easy to use receivers. These abilities define our Receivers for use by many different types of Hunters, Researchers and Biologists.

Size:
Sleek, light weight aluminum receivers that will not rust or corrode are still among the smallest receivers today.

Sensitivity:
Analog tuning makes it possible to tune in the transmitter to within 10 hertz, exactly where it is most powerful, an advantage over digital scanners and receivers that can only get within 1 kilohertz (that means 100 times more accuracy.) An analog meter is used and is also far more sensitive than just audio from the speaker or digital meters which only mimic a true needle meter.

Ease of Use:
Unlike other receivers our attenuator is built into the gain, eliminating the need for high-medium-low switches and a third knob. All you need to do is adjust the gain and tuning so that you get full deflection on the meter, and when you are too far out you can track by the audio when the gain is maxed as the attenuator automatically switches off. Two 9-volt batteries in the receiver ensures you have a backup when out in the field and a battery goes dead.

New MNS 4000

MN 3

MN-3

MN 10

MN-10

MNS

MNS

Specifications:
- 3 10Khz channels.
- Operates on two 9-volt transistor radio batteries, can switch between the two for a built in backup.
- Crystal controlled dual conversion
IF 10.7MHz, 455KHz
3.5Khz IF Bandwidth
- 148 dB minimum discernable signal
- signal strength meter
- Speaker and earphone jack
- 60 dB signal attenuation built into gain control provides pinpoint accuracy at long and close ranges

Specifications:
- Ten 10KHz channels.
- Operates on two 9-volt transistor radio batteries, can switch between the two for a built in backup.
- Crystal controlled dual conversion
IF 10.7MHz, 455KHz
3.5KHz IF Bandwidth
- 148 dB minimum discernable signal
- signal strength meter
- Speaker and earphone jack
- 60 dB signal attenuation built into gain control provides pinpoint accuracy at long and close ranges
Specifications:
-Each channel has 10KHz coverage
-Push button channel selection
-10KHz fine tune;
-Meter for signal strength
-Speaker and earphone jack
-State of the art integrated circuitry
-Triple conversion: -49MHz synthesized, -10.7MHz, -455KHz
-3.5KHz IF bandwidth
-Sensitivity of 152 dB minimum discernable signal
-100dB attenuation in gain control
-Two 9-volt batteries
-Weight of 15 oz
-Dimensions 133mm x 75mm x 55mm
Setup Price: $430
QuickFold Setup: $480
Setup Price: $480
QuickFold Setup: $530
 
Price:
QuickFold:
MNS-20:
$530.00
$580.00
MNS-40:
$580.00
$630.00
MNS-100:
$655.00
$705.00
 

Dual Function Meter

The Dual Function Meter is available for all MN and MNS series receivers and enables the lighting of the meter for night tracking and also has a built in battery test function so you can check on your battery strength at anytime.

Available for $25.00

Dual Function Meter Light
 

We have been making the FL and FLS receivers for decades. Ours is the original "Blue Box" that has been in use all over the world with excellent results. FL and FLS receivers are versatile and rugged units that are perfect for use from a vehicle with external antenna connected. When the lid is shut these receivers seal up tight to resist the elements and have a long life gel cell battery that can be recharged again and again. The FLS-200 Receiver can be setup to track 200 transmitters over two bands. These bands can be two consecutive or non-consecutive frequencies e.g. 216 & 217, 216 & 219 etc..

FL(S) Closed View

FL and FLS Series Receivers

FL(S) Open View

Features:
The FLS series receivers are digitally synthesized, triple conversion receivers. These are top of the line units with the best sensitivity and frequency stability. Available in 20, 40 and 100 channel models.

Specifications:
-Each channel has 10KHz coverage
-Push button channel selection
-10KHz fine tune;
-Meter for signal strength
-Speaker and earphone jack
-State of the art integrated circuitry
-Triple conversion: -49MHz synthesized, -10.7MHz, -455KHz
-3.5Khz IF bandwidth
-Sensitivity of 152dBm minimum discernable signal
-100dBm attenuation in gain control
-12 volt Gel Cell battery
-Dimensions 222mm x 107mm x 101mm

Series (Number of Channels) Price:
FL-10 (10 Channels) $500.00
FLS-20 (20 Channels) $530.00
FLS-40 (40 Channels) $550.00
FLS-80 (80 Channels) $600.00
FLS-100 (100 Channels) $650.00
FLS-200 (200 Channels) $850.00

View our Latest Advertisement

Copyright © 2012 L.L. Electronics. All rights reserved.