Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

103 N Prairie View Rd
Mahomet, IL, 61853
United States

Receivers

Our MN and MNS series receivers are the original, light weight, super sensitive and easy to use receivers. These abilities define our receivers for use by many different types of hunters, researchers and biologists.

Size:
Sleek, light weight aluminum receivers that will not rust or corrode are still among the smallest receivers today.

Sensitivity:
Analog tuning makes it possible to tune in the transmitter to within 10 hertz, exactly where it is most powerful, an advantage over digital scanners and receivers that can only get within 1 kilohertz (that means 100 times more accuracy.) An analog meter is used and is also far more sensitive than just audio from the speaker or digital meters, which only mimic a true needle meter.

Ease of Use:
Unlike other receivers our attenuator is built into the gain, eliminating the need for high-medium-low switches and a third knob. All you need to do is adjust the gain and tuning so that you get full deflection on the meter, and when you are too far out you can track by the audio when the gain is maxed as the attenuator automatically switches off. Two 9-volt batteries in the receiver ensures you have a backup when out in the field and a battery goes dead.

MNS-20

mns2040.jpg
mns2040.jpg

MNS-20

from 430.00

Our MNS Series Receivers are synthesized units, meaning they offer more sensitivity and range than our MN-3 and MN-10.  All of our units have the attenuator built into the gain, eliminating the need for a high-low switch.  Your distance will be portrayed by utilizing your gain knob and paying attention to the meter deflection.  

The MNS-20 offers double the coverage from that of an MN-10.  With the capability to track up to 20 channels, your frequency range is extended to 200KHz.

 

Optional: Add the Dual Function Meter (DFM) for $25.00.  This will give you a lighted meter with a battery tester.

Purchase the receiver only to use with an existing antenna, or upgrade to the setup price and get the receiver, antenna, and cable.

 

Receiver Option:
Quantity:
Add To Cart

Specifications:
-Each channel has 10KHz coverage
-Push button channel selection
-10KHz fine tune;
-Meter for signal strength
-Speaker and earphone jack
-State of the art integrated circuitry
-Triple conversion: -49MHz synthesized, -10.7MHz, -455KHz
-3.5KHz IF bandwidth
-Sensitivity of 152 dB minimum discernable signal
-100dB attenuation in gain control
-Two 9-volt batteries
-Weight of 15 oz
-Dimensions 133mm x 75mm x 55mm